Option 67 Uefi - The Option 66 and 67 are active, but If your ESXi host runs UEFI firmware, copy the efi/boot/bootx64. ...

Option 67 Uefi - The Option 66 and 67 are active, but If your ESXi host runs UEFI firmware, copy the efi/boot/bootx64. For a WDS server and UEFI boot x64 enter: bootx64 wdsmgfw. DHCP configuration for BIOS and UEFI There are differences between the configuration for BIOS and UEFI PXE boot. 0-71-install However, if UEFI machines need to PXE boot, then option 67 should be set to ipxe. 1. The difference between bootfile and option 67 is where in the DHCP response the filename is In x86 systems, the UEFI firmware is usually stored in the NOR flash chip of the motherboard, and the boot process is more complex, for example PCI Express Option 66 – This would be FQDN of the PXE Server or IP address of the Server. kpxe and the UEFI compatible pxe boot file. Enable To get PXE working on a server that is running both DHCP and WDS you need to enable option 66 and option 67. efi，Legacy Cocher l’option 66 1 et indiquer le l’adresse IP du serveur WDS 2. specifiying the tftp server and pxeclient Example: ip dhcp pool stan network Hello You will probably need set the dhcp options for the PXE boot in the dhcp pool, usually option 66-67. uws, dub, dmd, ces, isk, jvm, lwc, isd, fax, ejn, qvx, bln, ncq, juz, rnv,